Domino Logic
   HOME

TheInfoList



OR:

Domino logic is a
CMOS Complementary metal–oxide–semiconductor (CMOS, pronounced "sea-moss", ) is a type of metal–oxide–semiconductor field-effect transistor (MOSFET) fabrication process that uses complementary and symmetrical pairs of p-type and n-type MOSFE ...
-based evolution of the dynamic logic techniques based on either PMOS or NMOS
transistor upright=1.4, gate (G), body (B), source (S) and drain (D) terminals. The gate is separated from the body by an insulating layer (pink). A transistor is a semiconductor device used to Electronic amplifier, amplify or electronic switch, switch e ...
s. It allows a rail-to-rail logic swing. It was developed to speed up circuits, solving the premature cascade problem, typically by inserting small and fast pFETs between domino stages to constrain the interstage cascade velocity to a curtailed maximum—a curtailed ''deterministic'' maximum—without requiring other circuit design interlocks.


Terminology

The term derives from the fact that in domino logic (cascade structure consisting of several stages), each stage ripples the next stage for evaluation, similar to dominoes falling one after the other.


Dynamic logic drawbacks

In dynamic logic, a problem arises when cascading one gate to the next. The precharge "1" state of the first gate may cause the second gate to discharge prematurely, before the first gate has reached its correct state. This uses up the "precharge" of the second gate, which cannot be restored until the next clock cycle, so there is no recovery from this error. In order to cascade dynamic logic gates, one solution is domino logic, which inserts an ordinary static inverter between stages. While this might seem to defeat the point of dynamic logic, since the inverter has a pFET (one of the main goals of dynamic logic is to avoid pFETs where possible, due to speed), there are two reasons it works well. First, there is no
fan-out In digital electronics, the fan-out is the number of gate inputs driven by the output of another single logic gate. In most designs, logic gates are connected to form more complex circuits. While no logic gate input can be fed by more than one ...
to multiple pFETs; the dynamic gate connects to exactly one inverter, so the gate is still very fast. Furthermore, since the inverter connects to only nFETs in dynamic logic gates, it too is very fast. Second, the pFET in an inverter can be made smaller than in some types of logic gates. In domino logic cascade structure of several stages, the evaluation of each stage ripples the next stage evaluation, similar to dominoes falling one after the other. Once fallen, the node states cannot return to "1" (until the next clock cycle) just as dominoes, once fallen, cannot stand up, justifying the name domino CMOS logic. It contrasts with other solutions to the cascade problem in which cascading is interrupted by clocks or other means.


See also

*
Dynamic logic (digital electronics) In integrated circuit design, dynamic logic (or sometimes clocked logic) is a design methodology in combinatory logic circuits, particularly those implemented in MOS technology. It is distinguished from the so-called static logic by exploiting tem ...
*
Sequential logic In automata theory, sequential logic is a type of logic circuit whose output depends on the present value of its input signals and on the sequence of past inputs, the input history. This is in contrast to ''combinational logic'', whose output i ...


References


General references

* *


External links


Domino Logic, Boston University.Dynamic Logic, Paul DeMone.
{{Logic Families Logic families